|
New site? Maybe some day.
|
I blame the Christians when something like that hapens |
|
my manifold has been cracked for a couple of months now. they say i should just replace the whole engine. until then, i'm riding my mountain bike. not having wheels sucks balls. |
|
Hahaha. Just buy a block of platinum and make one yourself. |
|
I looked online and the part is only $200-300 |
|
the part may be only that much money, BUT the labor may be more lol mechanixxxxxxxx |
|
$120+ the part (you can supply it) |
|
2005 1.3hybrid civic is what I looked up... thats what you got right? |
|
plus i can get 80 bucks for the old one prolly |
|
|
my manifold has been cracked for a couple of months now. they say i should just replace the whole engine. until then, i'm riding my mountain bike. not having wheels sucks balls. |
That happened to a truck we had. We just got another piece of shit...it was cheaper. lol. |
|
you guys should just tell me all the info and i can send you an estimate it might be cheaper than you think since I have low overhead. |
|
My cousin fixes our car on the cheap, unfortunately he smokes a lot of pot and has serious ADHD so it usually takes a month of stopping by his garage before anything gets done. |
|
sounds like a typical mechanic to me |
|
1558 for a bunch of parts that sound expensive. I just paid the car off that month too. |
|
the worst was the driver was wearing more perfume that a french whore. I almost puked. now I have a wicked bad headache, stomach ache, and cold sweats. |
|
|
you guys should just tell me all the info and i can send you an estimate it might be cheaper than you think since I have low overhead. |
hey dude, i'm really considering throwing a whole new engine in my truck sometime. i know of one guy around here that will do stuff like that at his garage at his house for side work. i want to throw a mustang's 302 in it. both engines are exactly the same. how hard do you think that would be? |
|
rev how much are they charging you an hour for the mechanical work? i can check it here and see if its accurate to your location. |
|
but yea man, thats how much it costs to replace that part. shits wicked expensive. |
|
Don't forget you cna probably knock the platinum out and get a good 150 back on your dead converter too. |
|
|
|
you guys should just tell me all the info and i can send you an estimate it might be cheaper than you think since I have low overhead. |
hey dude, i'm really considering throwing a whole new engine in my truck sometime. i know of one guy around here that will do stuff like that at his garage at his house for side work. i want to throw a mustang's 302 in it. both engines are exactly the same. how hard do you think that would be? |
truck is kinda vague XD give me more info 302s fit in a lot of cars... do you already have the engine? |
|
|
Don't forget you cna probably knock the platinum out and get a good 150 back on your dead converter too. |
metal yards will give you 100 straight up for a converter as is.
Rev I take it you already got this done at the dealer for that ridiculous price...
|
|
|
but yea man, thats how much it costs to replace that part. shits wicked expensive. |
It is less than one hour of labor on all data.... the part lists for $982 |
|
im sure rev could have gotten it for 300 easy |
|
Last summer, the catalytic converter fell out of my freaking car while I was driving to work. I was at a red light, and all of a sudden... KA-CHUNK! Then, my car sounded like crap and drove like a lawn mower. It was totally awesome driving really slow with the exhaust pipe dragging on the ground. I only paid about $300 for parts and labor to have the new catalytic converter installed.
You can probably find one really cheap online (like on eBay), bring it to your mechanic, and pay the labor costs for them to install it. You could save a ton of money that way. That is, if your mechanic is cool enough to do something like that.
|
|
|
|
|
you guys should just tell me all the info and i can send you an estimate it might be cheaper than you think since I have low overhead. |
hey dude, i'm really considering throwing a whole new engine in my truck sometime. i know of one guy around here that will do stuff like that at his garage at his house for side work. i want to throw a mustang's 302 in it. both engines are exactly the same. how hard do you think that would be? |
truck is kinda vague XD give me more info 302s fit in a lot of cars... do you already have the engine? |
it's a 92 f150. i'd like to find a mustangs engine and swap it into my truck. they're both 302's. i still need to find the engine |
|
My car just randomly shit out its transmission last night. WOOOOOO!!! |
|
|
it's a 92 f150. i'd like to find a mustangs engine and swap it into my truck. they're both 302's. i still need to find the engine |
just curious but why are you doing this? if you want a fast truck i'd think you have to go bigger than a 302... I would guess your truck is kinda heavy compared to a mustang... i think f150 lightnings have a 5.8... Plus youll need a new computer and more and have less torque then prior. I dunno I'm sure it could be made to work... but seems like and odd route to take.
|
|
i know. it's a shitty old truck. it's more of a personal choice than anything else. i don't want to race it or anything. but seeing how it's an easy swap, i figure i'd go for the faster of the two 302's |
|
you need a fucking cat already? jesus. |
|
ok, they replaced the catalytic converter. $1180. still the light went on. they ran it through the computer. updated all the software. finally, it was the UPPER catalytic converter that was the issue and not the lower one. they are replacing it for free. |
|
alldata tells me this is only a 2 hour job. That's 160 in labor, and 380 in parts at my garage, respectively.
Plus a small upcharge for me having to deal with the shame of driving a hybrid in and out of the bay where friends and familly might see me. |
|
Rev,
Call a scrap yard and buy a used one. It's a LOT cheaper and you bring the part to your mechanic.
I use these frequently. Hope it helps.
Cats contain Palladium, which is VERY expensive and a commodity on the NYSE...prices go up and down. Save yourself the cash and call a scrap yard.
Here's the link to all of the local ones.
http://www.usedpartscentral.com/search_new_hampshire.htm
and this one...
http://www.salvageyards.ws/salvage_yards_in_nh.shtml
Call ahead and give them the year, make and model of your vehicle and they'll tell you if they have one or not.
|
|
Replacing the manifold on my car tomorrow. Goodbye money, thanks again Rt. 99 in Everett. |
|
the part for my car was $980. the labor was $180. then there is some parts in house that were $20. |
[default homepage]
|
[print][ | 10:14:17pm Apr 23,2024 load time 0.01840 secs/15 queries] | [search] | [refresh page] |
|